Engineered with two active ingredients mixable with both oil and water to pull dirt, oil, grime and grease off the treated surface, Wilita Foaming Engine Degreaser cleans the engine surface and other grease accumulated areas with “clean hand” and environmentally responsible formulation.
Sự miêu tả
Nguồn thông tin về an toàn và sức khỏe của sản phẩm bổ sung, vui lòng xem Bảng Dữ liệu An toàn Vật liệu (MSDS) để liên hệ với chúng tôi.THÔNG TIN
ỨNG DỤNG
Wait treatment surface until warm, not hot. Cover all water-sensitive areas and apply a liberal amount of degreaser to the treatment area. Wait 5 minutes to let the engine soak, filthy, dirty deposits melt. Rinse and leave a clean, presentable engine compartment. Use a soft brush or cloth to help remove the excess dirt from off-road driving or other sources.
TRÁCH NHIỆM VỚI MÔI TRƯỜNG
● Low VOC formula and ozone friendly.
● Consult your local air quality regulation.
SỬ DỤNG KHÁC
Motorcycles, bike and other non-electric powered vehicles.
Anywhere heavy grease accumulates, such as bike, motorcycle chain and filthy firewalls and concrete driveways.CHỈ SỬ DỤNG THEO CHỈ DẪN
Flammable liquid and vapor. Contents under pressure may cause flash fire, eye irritant. Use only in well-ventilated area. Do not breathe the spray. Over-exposure may cause respiratory tract irritation. Harmful if swallowed. Protect from sunlight and store at temperature below 120°F (49°C). Do not spray on open flames or any incandescent material. Do not puncture or incinerate even after use. Dispose properly in accordance with all national and local regulations. Can not be made non-poisonous.
GIAO TIẾP BẰNG MẮT
Immediately flush eyes with plenty of water for 15 minutes. Seek medical attention.
NGÀY HẾT HẠN
5 years from manufactured.
LIÊN HỆ DA
Flush skin with plenty of water.
NGÀY HẾT HẠN
Keep out of reach of children
Do not swallowTÍNH NĂNG, ĐẶC ĐIỂM
